Archive for entry doors

La Jolla Athenaeum Door Restoration

My childhood library in La Jolla is now the La Jolla Athenaeum Music and Arts Library. Driving by as I often do, I noticed the natural wood doors were not looking up to snuff. Now that my kids are grown and enjoying my as The La Jolla house painter , I offered my services gratis, to refinish these two French doors facing onto Girard Avenue.

Door refinishing is a specialty of ours at Peek Brothers and I enjoy the opportunity to work with the tools of my trade to keep my hometown looking sharp


• The wood door was in very poor condition so I stripped off the existing varnish.
• Using a Festool German vacuum sander, I removed all the old finish down to bare wood.
• Sikkens Cetol 1 stain was applied to darken the wood and bring out the Douglas Fir graining
• Three coats of Cetol 23 Plus was applied with sanding in between to insure a super smooth finish.
• The Cetol 123 Plus product builds to a nice satin sheen that is a touch softer and stays more resilient to heavy sun exposure than say, a spar varnish, which over time becomes harder and more brittle and thus prone to failure, especially on softer woods that expand and contract with heat and humidity changes like pine or Douglas fir.
• Entry doors or patio furniture made of Teak or Mahogany are very stable woods that look just stunning with Cetol Marine, a satin finish that is slightly tinted to enrich these natural hardwoods
If you have a front (or side) door that has been beaten up by the sun and needs some attention, we really enjoy wood refinishing and making the entry to your home really shine
You might wonder why I mention the sander I used by name? Festool makes quite possibly the finest sanding and dust collector system in the business. I particularly like that the sander has a very tight oscillation so it never leaves swirls in the wood that can ruin a finish. Also the vacuum attachment keeps dust out of the work area as it is collected right through the sander. When you are applying a fine finish, you cannot have any dust present. Clients love that it keeps our work areas nice and clean 
More on Entry Doors
More on refinishing Garage Doors
More on Historic preservation

 

Refinishing Entry Doors

Entry doors can get damaged by the sun. Proper preparation and refinishing will keep this door beautiful for years

Wood doors need to be maintained. If exposed to heavy sun and water, these doors need periodic maintenance
To refinish:

  1. If badly failing; remove all finish by stripping and sanding
  2. Stain wood to even color with Cetol 1 or Sansin
  3. Apply two to three coats of tinted Cetol23 Plus or Sansin
  4. Maintain every two years with a refresher coat and door will be beautiful for years

Refinishing natural wood home
Refinishing Teak Deck
Sansin refinish on mahogany door and windows
More on refinishing garage doors and entry doors
Deck refinishing
Refinishing teak furniture
For more photos of our projects

Refinishing Wood Entry Doors and Garage Doors

Wood doors and garage doors are beautiful greetings to us when we enter and exit our homes….but when they are worn or improperly maintained they can look terrible. How do we get these wonderful entrances to our homes looking so good?

Preparation is key to refinishing wood doors and garage doors!

When we first encounter a wood door that has not been properly maintained it often in such bad shape that we have to do an in depth prep…..Here is a step by step approach

  1. We start by chemical stripping to remove all old finishes.
  2. Sand sanding to remove all remaining finish and damaged wood.
  3. Using wood bleach (not household bleach!), bring wood to even color.
  4. Fill heavy damage with epoxy filler
  5. Apply stain to desired color
  6. Apply a minimum of 3 coats of finish
  7. Apply a clear caulk at sill/door frame junction

To keep a wood entry door or garage door maintained, it needs to be re-coated about every 2 years or so depending on exposure. If you wait too long you will have to strip and bleach again!

There is the classic finish of spar varnish which is available in gloss and satin…if you choose this, go to a Boat/Marine store and ask for the premium grade …expect to pay $50 a quart….it is worth it! This system requires more maintenance and is prone to peeling over time

I prefer another system that we use quite a bit, with super results over the long term: Sikkens brand:  SRD , Log and Siding or Cetol 1 and Cetol 23Plus. This is a stain and translucent tinted finish that provides wonderful protection and a beautiful look. This is an especially great product if epoxy filler has been used and the color needs to be evened out.