Archive for June 2016

What is Making My Paint Peel on the Interior of My Home?

After a big interior painting project, problems like peeling paint, blisters, and bubbles are the things that you may see on your interior wall. Latex and acrylic paint are most specifically prone to peeling, blistering, and bubbling. However, these types of problems can occur with any kind of finish. Peeling paint is more likely to arise when preventive measures haven’t been taken during the interior painting project. You might ask many different professional painters and you might get as many answers why does paint peel.

The reasons behind peeling paint:

Peeling is what happens when the top coat of paint parts ways with the coats beneath it. Actually, this is a phenomenon which is not always possible to predict. It may appear suddenly or occur gradually, over the periods of many months. On the other hand, blistering is likely to arise on a moist surface that wasn’t properly prepared and dried before it was painted. In order to prevent peeling paint, you need to take minute care when applying paint to areas of a house that tend to be humid, like basements.

Painting in Humid Weather:

Painting the interior surface of your home just before rain can be as problematic in every ways as it is when painting a wall which is already wet. If a rain or storm is expected, you should refrain from painting for nearly about 8-10 hours. Humidity in the air can lead to water-filled blisters or peeling paint, which must later be scraped and touched up.

Applying Primer and Paint on Unclean Wall:

In case the wall is not clean, you should not paint or primer on it. On the other hand, if the surface is covered with oil-based paint on it and not use latex based paint. If you mix different types of primer and paint on the same wall, it can lead to peeling paint as well. Actually heat causes the interior surfaces to expand. In such cases, latex and oil-based paints behave differently.

Unprepared Wall:

Perhaps the most important reason of peeling paint is applying paint on an interior surface which is not prepared well. Under any circumstances, you should not apply paint on a surface which is not prepared properly. Ask a professional painter in your locality to take care of the surface preparation. Sand the surface by using mild sandpaper. Use the best quality primer as it helps the paint to adhere to the surface well.

Can I Paint My Kitchen Cabinets?

A new coat of paint can always make shabby, exhausted kitchen cabinets look new again. Homeowners often become confused to decide whether or not to paint kitchen cabinets. The truth is, wood and wood laminated kitchen cabinets can always be repainted without any difficulties. However, plastic laminate cabinets usually resist repainting and those that can be repainted often require special paints and techniques.

In case you have a plastic laminate cabinet in your kitchen, you need to look for an experienced painting contractor to take care of the paint job. Furthermore, you need to test a small amount of sample paint you like to use in an inconspicuous area to ensure that it bonds well to the material of your kitchen cabinet.

Following are the steps to paint kitchen cabinets:

Step#1: Remove All Hardware:

The first thing you need to do is to remove all doors and hardware from the cabinets. Make sure to remove all pulls, knobs, latches etc. You should place all hardware including the screws, knobs, latches etc in a plastic bag inside the cabinets where you can easily locate them for reassembling.

Step#2: Clean Surfaces:

Kitchen is the place where grease, steam, food etc are commonly found. Before you start applying paint on your kitchen cabinet, it is important that you thoroughly clean the surfaces to ensure the paint properly adheres to the surface. You can clean the surface by using a solution made from tri-sodium phosphate and water. The rule to properly clean the kitchen cabinets is to rinse, but not to soak the surface. It is also important to allow the surfaces to dry properly.

Step#3: Sand the Surface:

Once cleaned properly, you need to sand the surface of the kitchen cabinets on all sides. While sanding, you need to use a wood sanding block. However, in case you want to repaint the kitchen cabinets just to facelift for them, there is no need to sand and paint inside the kitchen cabinets.

Step#4: Apply Primer:

Priming is also important when painting a kitchen cabinet. You need to apply a best quality primer to all surfaces of the cabinet to ensure a well-bonded and even finish coat.

Step#5: Apply the Paint:

You need to paint the inside edges and openings of the face frames first. Then you need to move to the outer cabinet sides and the face frame front. This actually enables you to work quickly in less critical areas. You always need to apply paints in thin, light coats to get the best result.

Is It OK to Apply Paint On Stucco?

Stucco is an ancient building material and it was used in many of the most famous ancient civilizations. Stucco was an important part of the buildings made by Greeks, Romans, and Aztecs. Even the Egyptian pyramids were stuccoed.

Previously, you could only find stucco painted in the materials that it was made of. However, today stucco can be seen in variety of shades. Generally, colored stucco is produced by adding pigment to the final coat as it’s applied, by creating a 1-8 inch thick layer of color. Nevertheless, many homeowners are not sure whether or not they can update the color of stucco. Stucco can be repainted, but you have to keep the following things in mind when it comes to paint your stucco.

Applying Paint on Fresh Stucco:

Under any circumstances you should not paint freshly installed stucco. Actually stucco is a porous material and it needs to breathe. Moisture penetrates the stucco surface and then evaporates away. When fresh stucco is installed in your house, a waterproof membrane like tar paper, house wrap etc is used between the stucco and the structure of the house to keep the inside dry.

The final coat of paint color of stucco goes on as a part of the installation process. Therefore, once the stucco is done, it’s done. If you want to apply additional paint on your stucco, you have to wait for the stucco to dry and cure. Generally this process takes a couple of weeks. If you apply paint on freshly installed stucco, the paint interferes with the breathability of the stucco surface. Also, the moisture can be locked in the wall between the surface and the paint. As a result, this causes the paint to bubble, peel, and chip since the moisture finds a way to escape.

Painting Stucco:

As mentioned earlier, you should paint freshly installed stucco, only when it is properly dry. You can even hire the professional painting contractors to apply paint on your stucco. Properly applied color coat of your newly installed stucco can last for decades.

Painting Old Stucco:

Whether or not you can paint your old stucco generally depends on several factors like what’s the condition of stucco, which color do you like, whether it is already painted or not etc. It is important to clean your stucco by using a pressure washer and then cover it with a fog coat. However, it is not possible to achieve very dark colors, since you can only add so much pigment to stucco.

When is The Best Time To Paint My Home?

The quick answer is after dawn and before sunset!   Just kidding :)……..Painting the exterior of your house is fine any time of the year since we have such a wonderful climate here is San Diego, CA! Also, the weather is not too hot or too cool, which is favorable for paint job. If you live here in San Diego, you know what I am talking about 🙂  But if you come from from the east coast or north of our great country, you have probably been trained to think in terms of “seasons” for exterior household maintenance like exterior painting.

Here is San Diego, we do not get snow and very little rain so that we successfully paint exterior year round. During the milder months we just plan for shorter days! If rain is in the forecast, we do not apply paint ….but once the weather is clear and wood is below 14% water content…painting is a go!

Ideal Temperature Range for Painting Your House:

The maximum and minimum temperatures, recommended for exterior house painting projects, usually vary depending on the type and particular brand of paint you are using. For example, if you use oil or latex based paints, the recommended temperatures for exterior paint vary. However, the golden rule is to use oil-based paint when the temperature range is between 40 degree and 90 degree Fahrenheit. On the other hand, the ideal temperature for applying latex base paint is between 50 degree and 85 degree Fahrenheit. Humidity level of the air is also an important consideration. The ideal humidity level for exterior painting is 40% to 70%. The best drying will occur in this humidity level. There are several products by major paint suppliers that are formulated to cure nicely outside these ranges…but for house painting in San Diego, we rarely need these specialty products.

A quick story

Peek Brothers has experience painting all over San Diego county….but the most problematic area for painting in La Jolla or any of the San Diego beach cites, has been in La Jolla Shores up on the hill a bit. Down at sea level there is not a problem; but because of Mt. Soledad and the fact that the wind prevails from the north, a pocket of moist air prevails in the area after mid-morning. This weather effect causes a pocket of cooler moist air blowing directly off the ocean. Even on warm nice days, we have had surfactant leaching from high quality paints. We have learned to pay attention to these “micro-climates” and adjust our painting and product choices to prevent problems. Only personal experience over 35 years has taught me this! 🙂

Too Hot or Too Cool Temperature is Not Favorable for Exterior Painting:

Very high or very low temperature can cause the paint to not adhere to the surface properly. This can lead the paint to cracking and peeling in the long run.

In super hot weather: paint on the shady side of the house and plan your work to follow the shade so that surface is within application temperatures. The danger of too hot a surface or too hot an air temperature is that the paint film will cure unevenly and can bubble

In cold weather (below 50 degrees) : paint can sag and allow surfactants to rise to the surface and discolor the paint film. In cooler weather we tend to do prep until mid morning and then paint till about 2pm and paint on the sunny side so that the paint has a chance to set before sundown.