Archive for Interior House Painting

When Can You Start Your Interior Painting Project?

Many homeowners want to know what the best time of the year is to start interior painting project in Fairbanks Ranch. We often associate painting as a task for warm weather, especially when you are doing an interior paint job. However, if you are going to do an interior paint job, winter could be the perfect time to get it done. There are plenty of reasons why you need to paint your interiors during the winter.

You Can Get a Great Deal:

Winter is typically considered a slow time for painting contractors in Fairbank Ranch. As a general rule, painting contractors will have a busy summer, so they remain free during the winter months. As a result, if you are looking for the best painting contractors for interior painting in Fairbank Ranch, you are likely to get a much better deal that you’d get during the busy summer. Although, warm weather condition is necessary for exterior painting, for interiors there are no such conditions, provided your Fairbank Ranch home is kept at a moderate temperature.

Winter Air Is Great for Curing Interior Paint:

While summer is the best time for exterior painting, there is something that painting contractors don’t enjoy i.e. the humidity in summer air. The more humid the air is, the longer your paint will take to properly dry. That holds the time and adds unnecessary times to your painting tasks. Due to this reasons, interior paint job during summer generally becomes much more expensive than it would be in winter. In winter months, the air actually helps curing the paint in no time.

The Paint Job Can Be Done Faster:

For an exterior paint job, the contractor starts to paint the walls when the sun comes up and stops when the sun goes down. In order to maintain quality and safety, it’s not recommended to paint your exteriors at night. However, with interior painting, there is no such problem. You can have a painter work at evening with no issues since you are working indoors. This gives flexibility to get the paint job done faster.

Paint Properly Adheres to The Surface:

If the temperature is very warm, paint will dry in no time and will not adhere to the surface well. As a result, paint will likely to peeling in the long run. However, if you paint during winter, the cooler temperature is ideal for your paint to dry and properly adhere to the surface.

What Questions Should I be Asking When I Meet with Each Potential Painting Contractor?

The way your home looks depicts a long story about the persons living in that home. Most homeowners wish to make their living place a “Dream Home” that creates a good impression in front of the neighbors. You can easily achieve this dream by giving your home a new paint job. Even more than that, a good paint job can improve the curb appeal of a home and increase its resale value once the home is put on the market.

For these all reasons, it is really important for a homeowner to choose an expert painter who will perform all the acceptable and masterful job of painting a home. One of the most important keys to find the right painting contractor in Spring Valley is to ask right questions when interviewing the potential contractors. Mentioned below is the list of questions a homeowner should ask when he/she meets a prospective painter.

Do You Have a List of Customers Who Will Be Ready To Verify The Quality of Your Work?

A painting contractor should have a good list of past customers who would be willing to verify the quality of their work. The painting contractors should also have a list of painting projects that he/she has completed recently. A good contractor should also let their customer speak with their past customers who have had firsthand experience working with that particular contractor.

How will My House Be Prepared for Painting?

This is an important question and the contractor should provide you with a detailed idea on how will they prepare the surface for painting. Ask them about how they are planning to repair the holes and bad spots and whether they would scrap or sand all surface to remove old paint.

What Type of Paint Will They Use?

Unless you request the painting contractor to use average quality paint to save a few dollars, you should always demand that premium quality paint is used in your painting project. Using cheaper quality paint will often cause many damages after only a short time.

How Much Will The Paint Job Cost?

This is the most important that you should ask the painting contractor before hiring them. You should not be fooled into believing that a low price is the first consideration when choosing a painting contractor. A low cost paint job does not always guarantee the best result. A good painting contractor should provide you with a fair and honest estimate for the paint job.

How to Prep Your Kitchen Walls for Repainting?

Kitchen painting is often considered the most difficult among the other paint projects. This is because kitchens are unlike other rooms in your home since they are exposed to food, smoke, grease, dirt, and mildew. Therefore, it is how to paint a kitchenimportant to keep some extra things in mind to ensure your paint job will stand out in the crowd.

Mentioned below are the steps that you need to follow while preparing your kitchen walls for repainting.

Clean Kitchen Walls:

The first thing you need to do is to clean your kitchen walls properly to make sure there are no grease, mildew, and dirt. Over time, kitchen walls develop a good layer of grease from everyday cooking, especially in smaller kitchens. You can take a scrubby sponge and clean the walls with some mild detergent. This will remove any grease and ensure that the paint will be able to adhere to the drywall.

Sand the Walls:

The next step is to sand the walls. Once the cleaning is complete and walls are properly dry, take coarse sandpaper and properly the surface. This will remove any bumps or other imperfections that your kitchen walls may have developed over the years. Also, check whether there are any holes or divots on the wall. If there are any holes, spackle them with spackling paste. Spackling paste is used by many professional painters in Solana Beach since it does not need a prime coat and it sands easily. Once the spackle paste is dry, you need to sand the place with 220 grit sand paper. It is important to sand the surfaces in a circular motion in order to get a smooth finish.

Get the Kitchen Ready for Painting:

Once sanding is complete, you need to get the space ready for painting. Wipe down all walls with a wet cloth and vacuum all of the dust to prep for paint. Lay down plastic on all cabinets, appliances, furniture, and floor.

Choose the Best Paint:

When it comes to choose the paint, you need to consider your kitchen layout and floor plan. If you have an open floor plan and a big kitchen, the best is to use flat finish on the ceiling, eggshell or satin finish for the walls and semi-gloss finish for the trims. On the other hand, use eggshell or satin finish for the ceiling if you have a smaller kitchen. This is a standard rule for all types of kitchens and will likely be consistent with the rest of the house.

How to Protect Your Furniture While you’re Painting My Home?

Since your furniture is an exquisite piece of work that you are very proud of, you need to cover up the same during a painting project. When applying paint on your interior walls, it’s natural that some paints may drop on your how to paint outdoor furniturefurniture. After all, the best painter in the world can make a mistake. Therefore, a good and responsible painter should always cover the floors and furniture while painting your home.

Removing the Furniture:

If you are wondering about how to protect your furniture while painting your home in Encinitas, the best thing you can do is to hire the professional painters in Encinitas. Professional painters won’t stumble over your furniture and stretch to paint behind the sofa. A professional painter will remove furniture from the room before applying paint to make the job easier and protect running wood and upholstery with spilled or spattered paint.

In order to make sure your furniture remain in good condition to be brought back into your newly painted room at the end of the painting project, you can just remove them from the areas where they could be damaged by spilled or spattered paint. You can also rent a temporary storage container to store your furniture while you work. In case there is furniture that is too heavy to move, you can pull it to the center of the room you are painting, away from the walls to be painted, and cover it with a plastic sheet to protect it.

You can also use professional-style drop cloths throughout the room to protect the flooring as well. Although plastic sheets are cheaper, they can easily punctured and shift under your feet while you are applying paint on walls, exposing areas of flooring. By covering your floor and furniture with a heavy canvas drop cloth, you can also keep the paint from being tracked all over the furniture and floors if it accidentally gets on the soles.

How to Protect the Work Area Spotless?

While painting your home in Encinitas, the professional painter should take some general precautions to protect your furniture and floors. However, the work area will most likely be full of dust. The best painters will always try to keep the dust contained and minimized. The goal should be to leave the space as clean as it was in the first place. The most important thing is that your valuable furniture and other belongings should be covered and protected from any paint spatter. A good painter will cover everything so well that there will be less or no chance of paint spatter on your furniture.

Can I Stain My Cabinets A Different Color?

You can stain your cabinets a different color to give it a new and refreshing look. In fact it is easier to change the color than replacing the old cabinets. Going from dark wood to a lighter color can be strenuous. However, applying a dark color for your light wood cabinets is usually an easier process. But before staining your cabinets a different color, it is always important to know the construction of the cabinets and whether the cabinet finish is sealed. In casehow to refinish cabinets the cabinet finish has a sealer, you will first need to determine which type of sealer was used for the cabinet finish. Knowing these details will help you determine how to proceed with staining your cabinets.

Cabinet Construction:

Typically, most cabinets are made of either solid wood or light plywood. There are some cabinets that have thin layers of veneer so that the wood pattern becomes uniform. Sometimes, veneers are used to intimate some special woods that are more valuable. When it comes to stain your cabinets, it is important know the construction of it since plywood and veneer require special care. The method of staining cabinets also depends on the cabinet’s finish. In order to determine whether the finish is sealed, you can apply a drop of water to the surface. If the water soaks in, you can say that the wood is not sealed. Depending on the type of surface, you may need minor treatment before staining.

Stain Products:

You can use stains to darken the unsealed wood cabinets. The stain will darken the cabinets with a great polyurethane finish. In case, the cabinet is sealed with anything other than polyurethane finish, it will need to be stripped of the finish before staining. Also, you need to test the stain in an auspicious area before using stain on the cabinets. This ensures that you will get the actual color you want. Since the interior color and finish of the cabinet is quite different from the exterior surface of the cabinet, the interior of the cabinet may not be the best place to test the stain.

Surface Preparation:

You need to remove all doors and drawers from the cabinets before staining it a different color. You should also take off all the handles, pull knobs, hinges, and any other types of hardware from the cabinets. Under any circumstances, you should not sand the unsealed cabinets. If the cabinet has other types of finish, you will need to strip the finish to bare wood so that it accepts stain.

Is Painting Your Ceiling The Same As The Wall Color a Good Idea?

As a homeowner, you surely have been exposed to many color theories  and decorating “rules”. Yoiu may have even heard about painting a ceiling the same color as the walls in an interior room.  It can provide your matching ceiling paintroom with an elegant, cohesive look, and is one that’s relatively easy to achieve. In the picture shown with a coffer trimmed ceiling, it is a perfect choice to define an open space that otherwise would have too much white

In a simpler bedroom, with less trim, often it works well to have the ceiling painted in a flat that is the same color as the trim….but if you have crown molding, the ceiling looks very nice as a 25% formula of the wall color, so that the crown gets a touch of definition.

Whenever you are considering a paint job for your home interior, you have to take into account what the recent trends are, even if you’re not likely to follow them. There are no hard and fast rules for painting ceilings. Nevertheless, it is a good idea to take into consideration the ambient light in your room, the architecture and the furniture/flooring colors rather than blindly following any current design trend. Following are the most important considerations you have to keep in mind when thinking about painting a ceiling the same color as the walls in your bedroom.

Great for Small Sized Room:

I am often asked…can I make this vanity bath feel bigger? My answer is usually to laugh and say” take advantge of the small size to emphasize “cozy”. By painting walls and ceilings a medium to dark color, the vanity bath can take on a very exotic or cozy feel for your guests. It is a great room to be dramatic!

Not a Good Idea for Big and Spacious Rooms:

While painting the ceiling and walls the same may be a good idea for smaller rooms, this effect may not be the best in a good-sized room. In spacious open room, the idea of painting ceiling and walls the same color can flatten out the look of the room. Instead, you can use different colors for the ceiling and walls separately to add elegance to a spacious bedroom. If the ambient light is right, and the wall color is pastel to medium, it works well to use 25% formula of wall paint on the ceiling for a cohesive feel.

Latest Exterior and Interior Paint Colors Ideas

When it comes to paint your walls with beautiful colors – the options are literally endless. With so many color options, it’s easily possible that you stick to one small section of color. In order to brighten up your thoughts, you exterior and interior paint colors ideassurely need the latest wall paint ideas for your space.

When it comes to choose the latest color trends, there’s a world of paint colors out there that can broaden your horizons. No matter if you need wall paint color ideas, or need to apply the latest colors on a certain room, you can easily get inspiration from the following paint color ideas.

Vibrant Pink:

The latest trend is to punch up a bathroom with vibrant, hot pink. Vibrant pinks are the best way to energize your bathroom. Some also use an intense version of favorite pink shade to contrast with the black and white tile of the bathroom. You can also add a bright patch to achieve a similar look.

Classic Color Combination:

People are also fond of using classic color combination palettes that include earthy tones and bold blues. These types of hues look great when applied on your exterior wall. You can also use grays to improve the crisp accent of colors. Some colonial colors are also in the market. For example, colors like white, cream, gray and neutrals can look great on your exterior walls. You can also give your house a bold saturated appearance by applying black, brown, red, and blue on the walls. Classic and colonial colors have been around the market for years and will surely rule the years to come.

Bright and Serene Shades:

Bright and serene shades are other important shades, popularly used by people at their interior house painting project. They are eye-propping and soothing and the watery hue provides the ideal background for your kid’s study area. You can even use palettes like brown and creams to achieve a spirit of authenticity, muted, and natural accent colors. You can also some craftsmanship to your house palettes by including muted, earthy tones like sage, khaki greens, ocher, and soil browns.

Copper Blush:

Copper Blush was the key color for 2015. This type of color truly reflects the movement as a beautifully heart-warming shade with exact amount of depth that provides you with an easy to live environment but with a brilliant touch of elegance. You can also use some coordinating colors to help create a stylish room which is perfect for you.

Top 4 Steps to Follow When Painting Interior Walls

Painting interior walls is, by far, the easiest way to freshen the look of your home. Here are some great tips to getting your painting project done more efficiently. Painting Interior Walls

#1Step: Start from the Top Corner:

It is the best  to start from the top corner of your home interior. Brush in at the ceiling (called cutting in)  a three-to-four inch wide area around the perimeter. I prefer a 3 1/2″ angled brush with Chinex bristles. The brush is worth the $25 cost as it will easily give you a sharp clean line. Brush it out so you have a soft edge where you transition to the unpainted area. In the old days you would roll the walls immediately, while the just completed brush work is was still wet BUT, with today’s paints it is better to let the brushed areas dry and then roll….otherwise the brushed (cut in) areas will show in what we painters call “Picture Framing”

#2Step: Never Forget to Prepare the Surface:

Virtually all  paint failures are due to improper surface preparation. The fact is that if you want a successful paint job, it has to start with properly preparing the surface area your need to paint.  Cleaning, masking, repairing and priming as needed will insure that the topcoats look beautiful.   Filling large holes in drywall     Trim Prep      Peeling paint

 

#3Step: Priming the Surface:

Read More→

3 Steps To Paint the Interior Trim of Your Room

Painting interior trim is a little more tricky than the walls or ceilings in your home.  Because your doors, frames, cabinets and windows are usually done with a higher gloss paint, it is important to be sure the surfaces are prepared and coated properly or your attention will be drawn to all the flaws (brush marks, hair/dirt in the dried film…or God forbid, bad adhesion and peeling!

With careful application of proper techniques, you can get a beautiful finish. The trim in your home can really make your walls pop!  I recommend that you buy the best trim paint you can afford….there is a big difference in how top quality paint applies , feels when dry and its performance over the long haul. Paint the Interior Trim of Your Room

What are the keys to painting your trim:

Choose Right Paint and Brushes:

Previously, alkyd (oil) based paints were popular among the homeowners for their high quality hard and smooth finish with great adhesion. Old oils tend to yellow quite a bit though, so any touch ups , even a few months later, will show.

However, modern acrylic (water based) paints are really a great choice for most projects.  With a top quality trim paint, you can achieve a smooth, rich and very durable finish. Acrylic paints are also easy to apply and clean up with soapy water. Furthermore, acrylic paints are environmentally friendly and hence, they pose a little health hazard since they have little, if any, odor. Plan on spending $40-$60 for a gallon of good acrylic trim paint. I also recommend a retarder like XIM Extender to “thin” the material if it is drying to quickly before flowing out. The extender retards dry time and allows the paint to flow out and brush marks disappear.

Just like the paint, you also need to choose the perfect brush for the paint job. I prefer premium grade “Chinex” bristles which are available from the major manufacturers like Wooster, Purdy or Corona. Pay for a good brush ($25-30), and maintain it/clean it. It will be an investment you will enjoy. For painting narrow trim a 2 1/2 ” angled sash brush is  good. I also keep a 3 1/2″ angle sah for brushing out larger projects like door faces. Here is an old painters trick: use a roller to get the paint onto the trim and then brush it out….a big time saver!

Maintain Proper Paint Order:

Read More→

Top 5 Ways to Patch Large Holes in Drywall

If you ever find a hole marring an otherwise perfectly good wall, you shouldn’t worry anymore. The simple solution is to patch your drywall. Patching drywall is really easier than it appears – you just need to use the right tools and a fewPatch Large Holes in Drywall basic principles.

There are so many products as well as “easy fixes” that you can use for patching drywall damage. There are two main steps involved in patching drywall – securing a new piece of wallboard in place, and taping and finishing the wall.

Step #1: Cut a Patch from a Piece of Scrap:

In order to secure a new piece of wallboard in place, you basically need to cut an even larger hole in the wall you’re patching. You can cut out a square or rectangular patch from the wall, even though the hole is of different shape. This would save your time and trouble. Once you are done, you need to place the patch over the hole-area and trace around it with a pencil.

Step #2: Cut Out the Drywall along the Traced Line:

Use a knife and cut out the drywall along the traced line. If the patch is large, you can use a drywall saw to cut the wall. Drywall saws are available at your home center for about $4. Be careful and use a light touch to avoid wiring and pipes that are often hidden in the wall

Step #3: Trim Away All Loose pieces on the wall and install an anchor backer.

You can also use a sharp utility knife to trim away any loose paper facing or pieces of drywall around the hole.  Insert a small piece of wood like a paint stir stick that is 2-3 ” longer than the hole is wide and screw into it on either side of the hole…this is the “backer” at the backside of the wall that you can screw the replacement piece of drywall to. You can also purchase “drywall clips” at the home center that will also work quite well.

Step #4: Tape and Texture

Once the patch is screwed onto the backer wood or held in place with clips, apply fiberglass mesh tape over the seams and apply drywall compound. This might take a few thin coats (do not try to do it all at once!) After it is fare and smooth rub over the area with a wet sponge to make all transitions even. Depending on your exiting texture you can either apply a light “skip trowel” finish with your putty knife and fresh compound or you can purchase a spray can of texture and spray on and “orange peel finish”

Step #5: Paint over the Patch:

Once the patch is dried, apply prime over the patch with a good primer and you are ready to paint!