5 Tips For Dealing With Paint Chips On Your Exterior in Scripps Ranch, CA

In looking to update the look of your home, one thing that you might need to do is to take care of some of the exterior issues that you can sometimes find yourself having.

Of course, it’s better if you are able to prevent these chips, but there are certain circumstances in which you don’t have a choice over how your exterior was painted before you lived in the home.

With that being the case, let’s now look at and consider five tips for dealing with paint chips on your exterior in Scripps Ranch, CA

1. Trying To Fix It If It’s Small In Area

The first thing that you’re going to need to do is to figure out how much area is actually affected by the paint chipping.

If you look at the exterior of your home and you determine that you don’t have that much paint chip to correct, it’s not going to be too much of a challenge — it’s just a matter of removing the few chips that you find and then taking corrective actions (see more below) before you continue to paint.

This is of course only the case if you have a small area with which to work — if you find that you have a larger area, you’re going to have to plan more to get the chips corrected.

2. Having The Right Tools For The Job

When you’re looking to correct the paint chips on the exterior of your home, it’s important that you have the right tools that will help you take care of them.

This is important because if you are just trying to fix the paint chips with whatever you have, you are likely not going to succeed.

You are going to need things like a wire scraper to scrape the paint, sanding equipment, and even the right kind of equipment to apply filler to the exterior of your home.

3. Removing Loose Paint Where Applicable

In the course of correcting the issue with paint chips on the exterior of your home, you may wish to address the loose paint that you find.

Since you can imagine that loose paint is not going to be good for your exterior when you’re trying to paint it, it’s going to be important to entirely remove it prior to painting.

This will be the kind of thing that you might need to use a wire scraper to remove.

4. Applying Filler To Fix Holes

Next, you are going to need to make sure that any holes that are on the exterior of the house are properly taken care of, and in this case, this means that you use a small amount of filler so that you will be able to ultimately have a surface that is smooth and ready to paint.

The good thing is that once you have applied the filler to the areas where it is needed, you will be able to paint the house as normal.

5. Make Sure You Fix The Problems That Caused The Chips

Lastly, you’re going to have to fix the problems that caused the chips to appear on the surface of your home in the first place, or you’re going to find yourself facing those same chips later down the line.

Unfortunately, if this means that you are going to have to remove more of the exterior paint of your home this may be entirely a longer painting project than you anticipated — but it’s better for the project to take longer than for you to have to face the same problem months down the line.

At Peeks Brothers Painting, we use only high-quality painting products from reputable manufacturers for guaranteed durability and quality of the final paint job.
Book a FREE estimate below or call us at (858)505-1361 if you have any questions.

Related: 6 Tips To Keep Your Interior Paint Job Less Messy
7 Tips To Create A Good Accent Wall in Del Mar, CA
Top 4 Steps to Follow When Painting Interior Walls