When you’re living in a home and have a metal fence outside, you sometimes might think that it would look better if it were painted — or perhaps it was at one point painted, and you just want to change the look.
It’s entirely possible that the color of your metal fence was one color when you moved into your home, and you’ve now decided that you want to change it to a color that more suits your personality.
On the other hand, you may find that you like the color of your metal fence, but it is just looking faded or bad over time, and you just want to re-paint it to make it look much better.
The first thing that you’re going to want to do is to fully clean and remove the rust from your metal fence. Over time, rust does tend to occur and accumulates over the surface of your fence unless you take certain precautions beforehand to make sure that it does not happen.
You could use certain cleaning agents to clean the fence and also make use of a kind of steel wool to scrub the fence until it is fully clean and free of any of the dirt and grime and rust that has been on the fence.
You must be sure that you are fully prepared for your painting work before you lift the brush for the first time.
This breaks down to your needing to not only make sure that you have enough paint and primer to paint the fence but also to make sure that you have protected the area around the fence, so that primer and paint don’t get all over the place and get paint where it doesn’t belong.
You can use a weighted down tarp, for example, to protect the area around the fence and ensure that your ground does not get paint on it.
The best path to having a well-painted fence is to have a fence that is as smooth as possible, and the way to get this done is to sand before you paint.
Though you don’t have to excessively sand, you can lightly sand the surface of the fence so that it is ready to be painted appropriately.
If you want to give your paint coats any chance of actually adhering to the surface of your fence, you are going to need to use a primer first.
There are certain primers that you can buy that are specially formulated for painting metal that help get the rust from not returning. These are typically the ones that you will want, particularly if you live in an area where you see a lot of precipitation.
The reason primer is so good is because it makes the surface smoother, and generally speaking, paint adheres to the surface of the coat of primer much better than it does to the surface of metal.
The last step in the process is that you’re going to want to apply about two coats of paint to your fence in the color(s) of your choice.
It should be noted that you should give a good amount of time after you have painted the coat of primer on for the primer to dry as well as time for the first coat of paint to dry and then the second coat.
It’s entirely possible that if you don’t wait, you will have paint from the previous coat coming up and off of the fence and onto the paintbrush.
If you need professional assistance painting the exterior of your home, Peek Brothers Painting can help.
Related: 7 Ways To Improve Your Curb Appeal in Del Mar, CA
Causes of Blistering and Bubbling on Your Exterior Paint Job and How To Fix It in Point Loma, CA
Roof Cleaning in San Diego, CA: Methods & Techniques